Xenus XSL User Guide
ServoTube Motor Setup
Copley Controls Corp.
189
G.2: ServoTube Auto Phase and Manual Phase
G.2.1: ServoTube Auto Phase
NOTE: The following steps use a ServoTube motor. For short stoke ServoTube motors with less
than 2 electrical cycles, proceed to
G.2.2: ServoTube Manual Phase (p. 192).
G.2.1.1
Verify that the Enable Input is not activated.
G.2.1.2
Apply power.
G.2.1.3
Click
Auto Phase
(
) to open the
Auto Phase Motor Direction Setup
screen.
G.2.1.4
Move the motor in the direction you wish to be considered positive.
The
Actual Position
value on the screen should change. If it does not change, see
Trouble Shoot Motor Direction Setup (p. 109)
.
G.2.1.5
Activate the Enable Input.
G.2.1.6
Click
Next
to display the
Auto Phase Motor Wiring Setup
screen.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
