name
Notes
analog: reference filter
disabled
Vloop: Input filter
disabled
Vloop: output filter 1
low Pass, butterworth,
2-pole, 200 Hz
Vloop: output filter 2
disabled
Vloop: output filter 3
disabled
Iloop: Input filter 1
disabled
Iloop: Input filter 2
disabled
Input Shaping
disabled
option
Notes
Method
Set Current Position as Home
name
Notes
oUt1
Isolated
not Configured
oUt2
oUt3
oUt4
HS output
not Configured
oUt5
brake active-HI
active
Notes
√
Short Circuit
√
amp over Temperature
√
motor over Temp
over Voltage
under Voltage
√
feedback error
motor Phasing error
√
following error
Command Input fault
motor Wiring disconnected
STo active
oPTIonal faulTS
over Current (latched)
name
Configuration
PU/PD
In1
enable-lo, Clear faults
+5V/Gnd
In2
not Configured
In3
In4
In5
In6
In7
opto
not Configured
In8
In9
In10
In11
motemp
+5V Pu
Copley Controls, 20 Dan Road, Canton, MA 02021, USA
P/N 16-01436 Rev 01
Page 11 of 28
RoHS
Xenus
PLUS
Compact
CANopen
XPC
cMe2 defaults
These tables show the Cme2 default settings. They are user-programmable and
the settings can be saved to non-volatile flash memory.