COOK Medical BIGopsy BLB-024115, Инструкция по эксплуатации

Страница: 6 / 48

6
2. Secure the handle to the forceps according to instructions as follows:
a) With the button depressed, retract the finger spool over the button.
b) Secure handle in this position by releasing the button (Fig. 2). The forceps shaft may
now be introduced into the handle.
c) Feed the forceps shaft through the handle (Fig. 3a). When the forceps shaft is visible in
the viewing window of the handle (Fig. 3b) press button to release finger spool (Fig. 3c).
This secures the forceps shaft in the handle.
3. After the handle is attached, ensure the operation of the biopsy cups before surgical
introduction. Biopsy cups default to the closed position. To open the biopsy cups pull
the finger spool towards the thumb ring (Fig. 4a). To close, push the finger spool forward
(Fig. 4b). Note: Biopsy cups need to be in the closed position before surgical introduction.
4. Through a previously placed ureteral access sheath, advance endoscope with the forceps
to the desired biopsy or retrieval site and proceed with biopsy or specimen retrieval.
Caution: Do not depress the button during use, the handle will release from forceps.
5. Prior to handle removal, ensure that the biopsy sample is retrieved.
6. At the completion of the procedure, detach the handle according to instructions as
follows:
a) With the button depressed, retract the finger spool over the button.
b) Secure handle in this position by releasing the button (Fig. 2). The forceps shaft may
now be removed from the handle.
7. Remove BIGopsy® forceps from endoscope.
8. Upon completion of the procedure, dispose of the device per institutional guidelines for
biohazardous medical waste.
HOW SUPPLIED
Supplied sterilized by ethylene oxide gas in peel-open packages.