[16]
Convergent-Design.com
Odyssey Anatomy
Od - Left Side
There are two Function buttons, F1 LOCK and F2 SHUT DOWN.
F1 LOCK
Lockout control for the Odyssey touchscreen. Push to engage and SCREEN LOCK will appear in the
center of the touchscreen’s Upper Tool Bar. Push F1 again to disengage. Engaging F1 also re-calibrates
the touchscreen.
F2 SHUT
DOWN
Preferred method to power down the Odyssey. Properly closes files on the SSDs and performs other
maintenance functions (see Getting Started -- Powering Down). Push to activate prompt asking SAFELY
POWER DOWN UNIT?
In a future free firmware update it will be possible to program these buttons for
additional functions.
Od - Right Side
There are three connector ports, (top to bottom) USB, HDMI OUT and RMT.
USB
An access point for servicing by Convergent Design.
HDMI IN
HDMI 1.4a (Mini HDMI) input port
RMT
A remote control connection to the Odyssey.
In a future free firmware update the RMT port will allow control interface with functions of
the Odyssey.
KENSINGTON LOCK PORT
A rectangular hole above the RMT port is for accepting a Kensington Security Lock.
Mounting
The Odyssey features three ¼-20 threaded sockets, one on the lower rear of the case and one each on the left and
right sides of the case. Do not exceed 11mm of depth when inserting a bolt, otherwise damage may occur to the
Odyssey. Additionally, there are four M3 threaded sockets on the rear of the case and two M4 sockets on each of
the sides of the case.
