[40]
Convergent-Design.com
Apollo Mode
Dual-4K Monitoring
In Apollo Dual-4K, both images can be viewed using a Picture-in-Picture view, or each individual input can be
separately viewed. Selection of the monitoring mode is located on the left on the Lower Toolbar. A/B represents
the Picture-Picture mode, and A or B represent the individual inputs. The Picture-in-Picture view can be toggled
between a/B and A/b, indicating which input is displayed in the larger v. smaller view. The PiP window can be
positioned on the lower left or lower right corners of the OLED To swap between a/B and A/b, tap the smaller
image on the OLED touchscreen. The monitoring mode chosen equally effects the OLED touchscreen, the HDMI
output, and the two SDI outputs. The video outputs are in 1080p.
Dual-4K Recording
Two 4K or UHD video signals can be recorded simultaneously. The resolution and frame rates must match. When
recording two 4K or UHD signals, the maximum available frame rate is 30p. When recording only a single 4K or
UHD signal, the maximum available frame rate is 60p. Dual-4K Recording supports up to 8 channels of audio (four
channels per video signal). All eight channels are displayed in the Audio Meters on the right end of the Upper
Tool Bar
Additional Dual-4K Information
Please see Apollo Quad-HD and the rest of the Apollo manual section for information on LUTs, playback, Master
Input, post procedures and other information.
Apollo Quad-HD
Apollo Quad-HD mode enables monitoring and recording of up to four HD video inputs simultaneously. A fifth HD
recording of a Quad-Split view of the four inputs or a Live-Switch between them is also available. Resolutions and
frame rates must match when recording. Supported frame rates are:
1080p at 23.98p, 24p, 25p, 29.97p, 30p, 50p*, 59.94p*, and 60p*
1080i at 50i and 59.94i
720p at 50p, 59.94p, 60p
* At 1080p above 30p, the fifth video track recording of a Quad-Split or Live-Switch is not available.
Quad-HD Monitoring
The four HD video inputs can each be viewed full screen or all viewed at once in a Quad-Split display. On the Lower
Toolbar starting at the left, five buttons allow the selection of QUAD, A, B, C, or D views. These controls override
all other switch controls and the selected view is sent to the OLED screen as well as the HDMI output and two SDI
outputs.
Quad-HD Monitoring During Recording
In
A/B/C/D
and
A/B/C/D + Quad-Split
recording modes, the HDMI and SDI A OUT show the Quad-Split while the
SDI B OUT shows the last button selected on the Lower Toolbar.
In
A/B/C/D + Live-Switch,
HDMI OUT shows the Quad-Split, SDI A OUT can show either the Quad-Split or the
Preview selection, and SDI B OUT can show either the Quad-Split or the Program selection.
