[60]
Convergent-Design.com
Accessories
Convergent Design Accessories
Vie all Convergent Design Accessories on our website at
Convergent-Design.com/accessories
. All Convergent
Design products are available through our worldwide dealer network. Visit us online at
Convergent-Design.com/
dealers
to find our nearest authorized dealer
Power Supply Options
The Odyssey can accept DC power ranging from 6.5-34v. This means that small camcorder batteries, large camera bricks
and even large block batteries or belts can be used to power the device. Depending on monitor and record modes, the
power draw from the Odyssey can range from 8-15w. Even small camcorder batteries can power the Odyssey for several
hours.
The Odyssey is supplied with a Convergent Design AC power supply. This is a universal switching power supply that can be
used throughout the world, and comes complete with several interchangeable plug connectors. Only use a Convergent
Design AC power supply on the Odyssey.
Odyssey Replacement AC Power Supply
CD-OD-AC-PS
The Odyssey uses a Neutrik 3-pin connector for power input. Convergent Design has modified this connector for
reliability, strength, and protection from shorting. Convergent Design supplies cables to 3rd party manufacturers of
battery plates and other Odyssey accessories.
ONLY USE A CONVERGENT DESIGN POWER CABLE ON THE ODYSSEY.
Optional Power Cables
Anton Bauer D-Tap 12v power cable to Odyssey (18”)
CD-OD-DTAP
XLR-4 (generic 12v) power cable to Odyssey (18”)
CD-OD-XLR
Fischer-3 (ARRI 24v) power cable to Odyssey (18”)
CD-OD-Fischer
Flying lead (bare wire pigtail) power cable to Odyssey (36”)
CD-OD-Flying
Battery Plate Options
Convergent Design offers a series of rear plates for the Odyssey that accept various manufacturers’ small camcorder
batteries.
Odyssey battery plate for SONY L-Series batteries
CD-OD-SLPlate
Odyssey battery plate for SONY U-Series batteries
CD-OD-SUPlate
Odyssey battery plate for Canon BP-9x Series batteries
CD-OD-CBPlate
Odyssey battery plate for Panasonic CGA-Series batteries
CD-OD-PCGAplate
Odyssey battery plate for JVC Camcorder-style batteries
CD-OD-JVCplate
Teradek Battery Plates
Convergent Design also makes battery plates that can also hold and power a pair of Teradek Bolt video receivers along
with the Odyssey. Two camcorder batteries (one for the Odyssey, one for the Teradeks) are used or a single large battery.
These plates are shipped in kits that include short SDI cables and power cables for the Odyssey and Teradeks.
Teradek battery plate for 2x Sony L-Series batteries
CD-OD-BOLT-SLPLATE
Teradek battery plate for 2x Sony U-Series batteries
CD-OD-BOLT-SUPLATE
Teradek battery plate for 2x Canon BP-9x Series batteries
CD-OD-BOLT-CBPLATE
Teradek battery plate for 2x Panasonic CGA-Series batteries
CD-OD-BOLT-PCGAPLATE
Teradek battery plate for IDX V-mount batteries
CD-OD-BOLT-IDXPLATE
Teradek battery plate for Anton Bauer 3-stud batteries
CD-OD-BOLT-ABPLATE
