[21]
Convergent-Design.com
Menu System
Odyssey
☼
Menu
The ODYSSEY Menu allows you to access basic device settings. This is where you can view and enter activation keys,
set date, time & metadata, format & recover SSDs and view information about the device such as the firmware
version and serial number. It is accessed by tapping
☼
then tapping
ODYSSEY
.
ODYSSEY
→
→
Option
Description
Notes
SET
ACTIVATION
UNIT
Enter Key or
‘OK’
For activating Odyssey
(required)
Tap to reveal a key code
prompt.
To activate the Odyssey
after initial purchase, go to
Convergent-Design.com,
create an account and add
the device. Once this is
completed, anytime one
wishes to purchase or rent
a recording option, return
to the Convergent Design
website and follow the
prompts. The website will
present a code which can
then be entered into the
Odyssey on the [activation]
menu page. To see if
a selection has already
been enabled, tap on that
option’s button to see if
ACTIVE appears.
APOLLO OPTION
Record up to four
HD or two 4K signals
simultaneously (Multi-
stream monitoring
is active with UNIT
activation.)
RAW BUNDLE
Record RAW and high
quality video derived
from the RAW signal from
certain cameras.
[More Info]
DEMO MODE: ALL AVAILABLE RECORD OPTIONS ARE FUNCTIONAL IN A DEMO MODE, BUT IF THE OPTION HAS
NOT BEEN ACTIVATED THE IMAGE FOR THAT OPTION WILL APPEAR WITH A LARGE BLUE BAR “WATERMARK” ON
SCREEN WHEN RECORDING. THIS BAR IS RECORDED IN THE IMAGE FILE.
SSDS
ERASE & FORMAT SSD1
Permanently erases everything on SSD1.
FORMATTING IS A
DESTRUCTIVE PROCESS
AND WILL ERASE ANY FILES
CURRENTLY ON THE SSD.
BE SURE TO DOWNLOAD
ALL FILES BEFORE
FORMATTING.
ERASE & FORMAT SSD2
Permanently erases everything on SSD2.
ERASE & FORMAT BOTH
Permanently erases everything on both
cards.
REBUILD SSD1
Non-destructively recovers /rebuilds file
system of SSD1
Use only in extreme cases
(such as if a computer
corrupts the SSDs file
system).
REBUILD SSD2
Non-destructively recovers /rebuilds file
system of SSD2
PLEASE NOTE: Formatting should be performed at the start of use of any new SSDs and the
start of any new project. Recovery is for when the SSD was not properly dismounted from the
Odyssey. This includes physically removing the SSD without running the eject sequence,
sudden loss of power to the Odyssey or improper powering down of the Odyssey. The Recover
process accesses any incomplete files on the SSD and, when possible, properly closes them.
NOTE: FORMATTING OF SSDs SHOULD ALWAYS BE PERFORMED ON THE ODYSSEY.
TIME
Set the appropriate time.
IMPORTANT FOR
RECORDING OPTION
RENTALS
DATE
Set the appropriate date.
RESET
MENU
Restore all default
settings.
Does not effect firmware
version or record options.
METADATA
Resets metadata fields
ALL (FACTORY DEFAULTS)
Resets all settings
RESET (DELETE) LUTS
Deletes User LUTs
ABOUT
Displays the firmware version, serial number, warranty status, and which Options are activated.
Check our website regularly to ensure you are running the current firmware.
The remainder of the
☼
menu replicates controls available on the Upper Tool Bar when the Odyssey is in RECORD
mode.
☼
╚
SETUP
INPUTS
OUTPUTS
AUDIO
