Ref.no.: 003274/Revision 2.4 @2019 Control Data Systems Page 83
|
201
Figure 6.2.18 Execute Object Method window (ISA 100)
To execute the method, type in the
TSAP ID
, the associated
Object ID
and the
Method ID
that you wish to
execute, then provide the method details in hex format in the
Details
input field and click
Execute.
Note
that the values of the two indices are 0 and the value of the
Committed Burst
field is -15 by default.
6.2.5
Network Health
The Network Health page provides a communication health report at network level.
The page consists of two sections containing the network summary statistics and the device-specific
communication health information, respectively, as shown in the following screen capture
(
Figure 6.2.19
):
Figure 6.2.19 Network Health sections (ISA 100)
In the network summary section, the following information is indicated:
•
Network
ID
and
Network Type
– network identification data (where applicable);
