Ref.no.: 003274/Revision 2.4 @2019 Control Data Systems Page 135
|
201
Figure 7.2.4 Services graphical representation (HART)
Service details
In addition, when you select a service, information about the service parameters will be shown in the
Service details
section at the bottom of the page.
The service information includes the following parameters:
•
Service ID
– the service identifier based on the service owner;
•
Application domain – the type of service;
•
Source/destination device
– the EUI64 address of the source device, and the destination device
respectively;
•
SourceFlag
– indicates if selected device is the source of the communication;
•
SinkFlag
- indicates if selected device is the destination of the communication. If both SourceFlag
and SinkFlag are set, this indicate a bidirectional communication between selected device and
the destination of service;
•
IntermittentFlag
- indicates if the service is used for acyclic/intermit communication;
•
Period
– the frequency for generating packets for cyclic communication (burst messages);
•
RouteID
– the ID of the route assigned to the service (each service having one Route ID assigned
by Network Manager);
•
Timestamp
– the time and date the service was created.
7.2.3
Devices
The Devices page features the list of devices that exist in the network and a search form that enables you
to search devices based on their EUI-64 address, tag, and/or state, as shown in the following screen
capture (
Figure 7.2.5
):
