
Ref.no.: 003274/Revision 2.4 @2019 Control Data Systems Page 100
|
201
-
Advertise Period (s)
– 10 seconds; represents the period to be used by routers to send
advertisement requests; the possible values for this field are: 1,4,7,8,9,10,11,13,14;
-
Join Links Period (s)
– 5 seconds; represents the period to be used by routers for the join
links used during join process of other devices through these routers;
-
Topology
– choose between Mesh and Star topologies;
-
Channels
– 12,20,24,23,18,25,21; represents the list of IEEE 802.15.4 channels that are
used for data communication in the whole setup;
o
enable the desired frequency channels for communication with the network devices.
On hover over an edit box a tooltip will appear, indicating the allowed format, range and a
description (where necessary for disambiguation) for each value.
•
In the
Logging
section, select the
Logging level
, which indicates the degree of detail provided in
the logs, as follows:
o
ERROR for error messages only;
o
WARN for error and warning messages;
o
INFO for error, warning, and information messages;
o
DEBUG for error, warning, information, and debug messages;
When you have finished editing the settings, click
Save
.
6.3.5
Device Management
This Device Management page enables you to edit the provisioning information in the
system_manager.ini
file for existing devices and to add new devices to the network.
WARNING! Do not change these settings unless you were specifically instructed by a CDS Technical
Support representative! Incorrect values may render the devices dysfunctional or may cause difficulty
to trace malfunctions.
Click
Help
in the upper right corner of the window to view information and examples of the accepted
data formats in all the sections.
In the following screen capture (
Figure 6.3.5
) is shown the Device Management window: