Ref.no.: 003274/Revision 2.4 @2019 Control Data Systems Page 69
|
201
Figure 6.2.5 Devices list and search form for the network (ISA 100)
6.2.3.1
Search devices
When the Device page is loaded, the registered devices are displayed by default.
You have the following options to search a device:
1.
Search by EUI-64 address
To search a device by its EUI-64 address, you must type the address in the
EUI-64 Address
input
field and click
Search
.
For partial search you must perform the following actions:
a.
type part of the EUI-64 address in the
EUI-64 Address
input field;
b.
select the desired state from the
Show Devices
drop-down list and click
Search;
the system
will retrieve all the devices whose EUI-64 addresses contain the characters provided by the
user.
To delete the search parameters, click
Reset
.
2.
Search by device tag
A tag is a custom description that you can assign to a device in order to facilitate identification of
that device in the plant. One tag can be assigned to a single device.
To search for devices based on their tag, type the tag in the
Device Tag
input field, and click
Search
.
Note that the tag field is case sensitive
.
To delete the search parameters, click
Reset
.
