Ref.no.: 003274/Revision 2.4 @2019 Control Data Systems Page 116
|
201
Figure 6.3.14 Adding a Bulk Transfer window-BTO option (ISA 100)
2.
in the form, select the source device from the
EUI64 Address
drop-down list;
3.
select the
Transfer Type
:
UDO
or
BTO
; the form will reload, displaying specific Parameters
depending on the transfer type you selected (as shown in the two previous screen captures);
4.
type in the transfer
Parameters
in the dedicated fields; the default values for each transfer are,
as follows:
•
for UDO transfers:
o
TsapID
: 2;
o
ObjectID
: 2;
•
for BTO transfers:
o
Period
: 2;
o
Window
: 30;
o
TsapID
: 2;
this value is read-only
;
o
ObjectID
: 7;
this value is read-only
;
o
Excess Burst
: -15.
5.
Click
Save
to create the bulk transfer operation, or
Back
to cancel the operation and return to
the Bulk Transfers page.
6.3.11.2
Editing a Bulk Transfer
To edit a bulk transfer, you must perform the following actions:
1.
click on the device EUI-64 address, in the Bulk Transfers list; the
Edit
form will be displayed as
shown in the following screen captures (
Figure 6.3.15
and
Figure 6.3.16
):
Figure 6.3.15 Editing a Bulk Transfer window-UDO option (ISA 100)
