Ref.no.: 003274/Revision 2.4 @2019 Control Data Systems Page 117
|
201
Figure 6.3.16 Editing a Bulk Transfer window-BTO option (ISA 100)
2.
edit the desired parameters.
Note:
You cannot edit the device address and you cannot change the transfer type for an
existing transfer. In addition, the TsapID becomes read-only for the UDO transfer;
3.
click
Save
to create the bulk transfer operation, or
Back
to cancel the operation and return to the
Bulk Transfers page.
6.3.12
System Status
The Statistics page displays statistical information regarding processor and memory usage, and load
average on the VR950.
In the following screen capture (
Figure 6.3.17
) are shown the section of the Statistic page:
