Ref.no.: 003274/Revision 2.4 @2019 Control Data Systems Page 160
|
201
Figure 7.3.6 Monitoring Host window (HART)
7.3.5.1
Burst Messages
Adding a burst message definition
To add a burst message definition, you must perform the following actions:
1.
in the empty edit box, type the parameters of a burst message definition from a particular
device, following the order and format indicated in the
Help
form: EUI64 address, the number of
command of which response will be published through the burst message, the index of the burst
message, the update period and maximum update period in 1/32 ms not exceed 3600s as
configured through command 103;
