Ref.no.: 003274/Revision 2.4 @2019 Control Data Systems Page 137
|
201
To delete the search parameters, click
Reset
.
3.
Search by device state only
To display devices based on their state at a given time, select the desired state from the Show
Devices
drop-down list. The device list will update automatically.
You can choose between two states, as follows:
•
Registered – the device has successfully joined the network and is ready to operate;
•
Unregistered – the device has lost connection with its neighbors in the network.
7.2.3.2
Device List
The
Device list shows the network devices in a table, one item per line, with main information about
each logical device, as follows:
•
EUI-64 Address
(the MAC address);
•
Nickname
– the short address;
•
Device tag
;
•
Device role
(Gateway, Network Manager, Access Point, Field Router) and
Model
(manufacturer
information);
•
Status (Full
Join
for registered devices,
Not Joined
for unregistered devices);
•
Last Read (the date and time of the last reading from the device) and a link to the Readings page
for the device in question.
In addition, the Device list provides a quick link to the Run Commands page for that specific device.
When you load the page, the registered devices are displayed by default. In order to view unregistered
devices, select
Unregistered only
in the
Show Devices
drop-down list.
The total number of rows in the table is indicated in the top left corner of the table. Here you can set the
number of items to be displayed per page in the table. The default number is 10. Paging controls in the
top right corner of the table also enable you to navigate through the other pages of the table.
7.2.3.3
Delete a Device
In the Devices page you have the option of deleting an unregistered device. When you delete a device, it
will be removed from the network and any related data, including previous readings, will be deleted
from the database.
To delete the device, click the icon
located next to the device. The system will require confirmation
to perform the action. Click
OK
to delete the device or
Cancel
to abort the action.
7.2.4
Device Details
In this page you can see all the information available for the selected device and perform device-specific
commands. The page is accessed by clicking on the device
EUI-64 Address
in the device list.
