4. BIOS Setup
34
User’s Manual
Description
Choice
WDT Output to PO2
Set watchdog timer output to PO2.
Selecting "Enabled" connects the output of the
watchdog timer to the PIO2 pin in the RAS
connector. The output value changes depending
on the "WDT Power-on State" and "WDT Time-up
State" settings. (See P74)
Disabled
Enabled
WDT Power-on State
This item is enabled with "WDT Output to PO2"
set to " Enabled." Set the state of output from the
watchdog timer when the power is turned on.
(See P74)
Off
On
WDT Time-up State
This item is enabled with "WDT Output to PO2"
set to " Enabled." Set the state of output from the
watchdog timer when the time-up. (See P74)
On
Off
HDD Select
Set the transfer mode of the HDD (SDD)
connected. The default is "Auto Select"; you
usually do not have to change this setting.
UDMA33
Auto Serect
