4. BIOS Setup
50
User’s Manual
Save & Exit Setup
Pressing <Enter> on this item asks for confirmation:
Save to CMOS and EXIT (Y/N)? Y
Pressing the <Y> key saves the changes made on the Setup screen to CMOS (EEPROM).
Pressing “Y” stores the selections made in the menus in CMOS(EEPROM) – a special section of
memory that stays on after you turn your system off. The next time you start up your computer, the BIOS
configures your system according to the value stored in CMOS(EEPROM). After saving the values the
system is restarted again.
Exit Without Saving
Pressing <Enter> on this item asks for confirmation:
Quit Without Saving (Y/N)? N
Pressing the <Y> key quits Setup without saving the changes made on the Setup screen to CMOS
(EEPROM). Quitting Setup without saving leaves the last saved settings in effect, with which the
system is rebooted after that.
