4. BIOS Setup
User’s Manual
33
Description
Choice
Video RAM Cacheable
The default is "Disabled"; you usually do not have
to change this setting.
Disabled
Enabled
Power-Supply Type
The default is "ATX"; you usually do not have to
change this setting.
AT
ATX
Video Share Memory Size
Specify the size of video memory. The specified
size of main memory is allocated as video
memory.
16M
32M
64M
Select Display Device
Specify the display device.
Set this item to "LCD" when the monitor to be
used is a DVI/panel-link type (see "DVI Connector
in Chapter 6.
CRT
LCD
CRT+LCD
Panel Type
Specify the panel type.
In Auto mode, the type (SVGA or XGA) of the FPD
is automatically identified with the serial signal
(COM) of the FPD at startup. If no FPD is
connected (or the FPD connected is left off), the
module enters the CRT mode (providing no
display on the FPD). *1 *2 *3
Auto
640x480
800x600
1024x768
1280x1024
Lan2 Select
Enable or disable the left LAN port.
Enabled
Disabled
Serial1 Select
Switches between the RS232C (Serial1 connector)
and RS485 (in the RAS connector).
RS232C
RS485
Serial2 Select
Switches between the RS232C (Serial2 connector)
and touch panel port (in the DVI connector).
RS232C
Touch Panel
*1
In the "Auto" mode, only a CONTEC panel display can be identified when connected. If any other monitor is
connected, the module enters the CRT mode.
*2
For use of "Auto," be sure to set "Serial2 Select" to "Touch Panel."
*3
FPD: Flat Panel Display LCD device
