Consilium Salwico CS4000, Руководство по установке

Страница: 175 / 277

IS optical smoke/heat detector
Salwico NS-AOHS-IS
Part no. N11250
System: Salwico CS3000*, CS4000, NSAC-1 fire alarm system
Specifications may be subject to change for improvement without prior notice Data sheet no: N11250.NS-AOHS-IS.10.1.E
Ç Consilium
Consilium Marine AB
P.O. Box 8763, SE-402 76 Göteborg
Phone +46 31 7107700 Fax +46 31 7107800
www.consilium.se
Description
NS-AOHS-IS is an intrinsically safe analogue addressable
multi sensor detector for Salwico fire alarm systems.
It has two separate analogue sensor elements. One optical
for smoke detection and one heat-sensing element for heat
detection.
Alarm condition is indicated on the detector via a red
LED. The LED is lit until the alarm has been reset on the
control panel.
The address is set with a DIP switch, which is mounted on
the backside of the detector.
NS-AOHS-IS is connected to the detector loop via the
ISOLATOR-A, part. no. N1790. Up to 20 addressable IS
units can be connected to one ISOLATOR-A.
It is not possible to connect any remote LED indicator to
NS-AOHS-IS.
Safety data
Max input voltage (U
i
) 28 VDC
Max input current (I
i
) 93.3 mA
Max input power (P
i
) 0.66 W
Max internal capacitance (C
i
) 1 nF
Max internal inductance (Li) Negligible
Responsible manufacturer Consilium Fire & Gas,
www.consilium.se
Only clean outside of detector by using a damp cloth.
Data
Smoke sensing method Light scattering type Infra-red
Nominal voltage
24 VDC
Working voltage 15–28 VDC
Working current 0.2 mA
Alarm current 2.5 mA
Alarm temperature 84°C
Temperature range -25°C to +70°C
Ambient humidity 0-95% RH, non-condensing
Ex class II 1G EEx ia II C T5 T
a
:
70°C
Cert. NEMKO 05ATEX1136X
CE 0470
Colour White
Weight
~100 g (head only)
~340 g complete with
ADAPTER AOHS-IS and
base 2IP55
It is important only to use the special base adapter
ADAPTER AOHS-IS part. no. N1430 together with a
suitable base. For information about suitable bases, see
separate document “Base matrix Salwico units”.
* SPK-2 for NOSE based detectors.
Dimensions (mm) Connection
Hazardous area Safe area
1(+)
2(-)
21(+)
22(-)
24(-)
23(+)
Loop in
Loop out
ISOLATOR-A
1(+)
2(-)
To next unit
NS-AOHS-IS