Consilium Salwico CS4000, Руководство по установке

Страница: 105 / 277

Service & Maintenance manual Chapter 6: Software
Salwico CS4000
16
Download configuration file from the Salwico
Memory Stick
TM
1. Connect the Salwico Memory Stick
TM
to one of the
USB ports on the USB expansion board (piggyback
board located on the Base Board).
2. Choose Menu/ 6 Service/ 7 load config from Memory
Stick
3. A list of the available “.c4d” files on the Salwico
Memory Stick
TM
will be presented. Choose the
appropriate “.c4d” configuration file from the list and
press OK.
4. The new configuration file is downloaded to the
CS4000.
The old configuration file is automatically renamed
by the system and saved on the Salwico Memory
Stick
TM
.
5. Disconnect the Salwico Memory Stick
TM
6. Use the CS4000 control panel to update the system
with the new configuration file by choosing:
-
Menu/ 6 Service menu/ 6 Reload Configuration/
1 Load entire configuration
or
-Menu/ 6 Service menu/ 6 Reload Configuration/
2 Load supplementary texts only
7. If 1 Load entire configuration is selected above, the
Base Board will re-start and load the new
configuration file.
If
2 Load supplementary texts only is selected, the
system will use the new texts without having to re-
start. Any other changes made to the “.c4d” file will
be ignored, but will come into effect the next time the
system is re-started.