Consilium Salwico CS4000, Руководство по установке

Страница: 103 / 277

Service & Maintenance manual Chapter 6: Software
Salwico CS4000
14
Chapter 6: Software
Configuration program
The CS4000 central is delivered pre-programmed with a
standard configuration file. See the separate manual
CS4000 Configuration program manual for information on
how to create and update a configuration file.
To upload a configuration file from CS4000
When you want to view or make changes in an existing
configuration file you can get it from the CS4000 central.
The configuration file can be uploaded in two ways:

Direct to PC via USB cable

To Salwico Memory Stick
TM
(the system must be equipped with an USB
Expansion Board)
Upload configuration file to a PC
1. Connect a PC via an USB cable to the USB
port on the Base Board (not the USB
Expansion Board, if present).
2. The CS4000 will now present itself as an
extra “drive” in your PC. Open the extra
drive.
3. You will find a file with the file extension
“.c4d”, which is the configuration file used by
the CS4000 system.
Example of file name:
SG12345.C4D
4. Copy the “.c4d” file to your local disc before
working with it.
Upload configuration file to Salwico Memory
Stick
TM
1. Connect the Salwico Memory Stick
TM
to one of the
USB ports on the USB expansion board (piggyback
board located on the BaseBoard).
2. Choose Menu/ 6 Service/ 8 upload config to Memory
Stick
3. Choose the current “.c4d” configuration file from the
list and press OK.
4. The system will now upload the configuration file.
5. When the upload is complete, disconnect the Salwico
Memory Stick
TM
and copy the configuration file to a
PC.