Consilium Salwico CS4000, Руководство по установке

Страница: 119 / 277

Service & Maintenance manual Chapter 7: Service menu in CS4000 (access level 4)
Salwico CS4000
30
Loop units (press 2 at Loops screen)
Loop units
LOOP x: x is the logical loop number
SMOKE HEAT x: Detector type and logical address x
(A/B): The unit answers on side A (primary) and side B
(secondary); when looking for a short circuit or a cable break
this information is useful for locating the break or short
circuit
- Press OK to monitor details about the selected loop unit
- Press 0 to disconnect the selected loop unit
- Press 1 to print the loop unit list
- Press 2 to simulate a fire alarm in the system
- Press 3 to remove the loop unit from the configuration
LOOP UNITS 1(17)
________________________________________
1 LOOP 1 SMOKE HEAT 1 (A/B)
2 LOOP 1 SMOKE HEAT 2 (A/B)
3 LOOP 1 SMOKE HEAT 3 (A/B)
4 LOOP 1 SMOKE HEAT 4 (A/B)
5 LOOP 1 SMOKE HEAT 5 (A/B)
6 LOOP 1 SMOKE HEAT 6 (A/B)
7 LOOP 1 SMOKE HEAT 7 (A/B)
8 LOOP 1 SMOKE HEAT 8 (A/B)
9 LOOP 1 SMOKE HEAT 9 (A/B)
10 LOOP 1 SMOKE HEAT 10 (A/B)
11 LOOP 1 SMOKE HEAT 11 (A/B)
________________________________________
OK=Details, 0=Disconnect, 1=Print List
2=Set In Fire, 3=Erase