Consilium Salwico CS4000, Руководство по установке

Страница: 104 / 277

Service & Maintenance manual Chapter 6: Software
Salwico CS4000
15
To download a configuration file to CS4000
When the configuration file is finished it is time to download
it to the CS4000 system. The configuration file must have the
file extension “.c4d”.
If only supplementary texts has been updated in the “.c4d”
file it is possible download them separately, see below
instructions.
The configuration file can be downloaded in two ways:

Direct from PC via USB cable

From Salwico Memory Stick
TM
(the system must be equipped with an USB
Expansion Board)
Note :
Make sure to work with the latest “.c4d” file when making
changes. The latest “.c4d” file may be uploaded from the
CS4000 system, see instruction above.
In Base Board software versions before 1.0.18 the definition
file must be named “current.c4d”
Download configuration file from a PC
1. Connect a PC via an USB cable to the USB port on
the Base Board (not the USB Expansion Board, if
present).
2. The CS4000 will now be displayed as an extra
“drive” in your PC. Open the extra drive.
3. Change the file extension on the current configuration
file to “.old” and save it as a back-up file.
4. Copy the new configuration file with the file
extension “.c4d” from the PC to the extra drive.
5. When the file copy is completed, remove the USB
cable from the Base Board.
6. Use the CS4000 control panel to update the system
with the new configuration file by choosing:
-
Menu/ 6 Service menu/ 6 Reload Configuration/
1 Load entire configuration
or
-Menu/ 6 Service menu/ 6 Reload Configuration/
2 Load supplementary texts only
7. If 1 Load entire configuration is selected above, the
Base Board will re-start and load the new
configuration file.
If
2 Load supplementary texts only are selected, the
system will use the new texts without having to re-
start. Any other changes made to the “.c4d” file will
be ignored, but will come into effect the next time the
system is re-started.