Consilium Salwico CS4000, Руководство по установке

Страница: 101 / 277

Service & Maintenance manual Chapter 4: Replacing/Adding/Deleting fire detectors
Salwico CS4000
12
Deleting a loop unit from the service menu
1. Open the service menu: Menu/ 6 Service menu/ 5
Loops .
2. Select an analogue loop from the loop list (loop no. 2
is selected in the below example). Press
2=Loop
Units .
LOOP 2(19)
________________________________________
1 LOOP ANALOGUE 601
Loop 1 on LB3 6
24 Loop Units Expected
2 LOOP ANALOGUE 602 .
Loop 2 on LB3 6 .
11 loop Units Expected .
3 LOOP ANALOGUE 603
Loop 3 on LB3 6
0 Loop Units Expected
________________________________________
OK=Details, 0=Disconnect, 1=Print List
2=Loops Units ,3=Add Unit,4=Scan loop
3. Select a loop unit to delete from the list Loop units .
Press 3=Erase Loop Unit
LOOP UNITS 1(11)
_________________________________
1 LOOP 602 MCP 1 (A/B)
2 LOOP 602 SCI 2 (A/B)
3 LOOP 602 MCP 3 (A/B)
4 LOOP 602 SCI 4 (A/B)
5 LOOP 602 MCP 5 (A/B) .
6 LOOP 602 MCP 7 (A/B)
7 LOOP 602 SCI 8 (A/B)
8 LOOP 602 MCP 9 (A/B)
9 LOOP 602 SCI 10 (A/B)
10 LOOP 602 MCP 11 (A/B)
11 LOOP 602 SMOKE 201 (A/B)
________________________________________
OK=Details, 0=Disconnect, 1=Print List
2=Set In Fire,
3=Erase Loop Unit
4. The configuration file is now updated in the RAM
memory.