manualshive.com logo in svg

Conrad 1484607, Руководство по эксплуатации, Страница: 34 / 40

Поделиться
Скачать
Conrad 1484607 Скачать руководство пользователя страница 34

34

d) Timer Setting "TIME:"

The remote control offers the option of starting a timer (1 - 10 minutes) at the push of a button. The remaining timer 

time is displayed and during the last 30 seconds before the end of the set time, the remote control emits acoustic 

warning sounds. Thus, the flight time of an electric model can be perfectly used without discharging the rechargeable 

battery too deeply by linger flight times and thus damaging it.

Setting the timer
Call the programming menu. 
"REV" starts to flash in the display.
Push the buttons "UP" and "DOWN", until "TIME:" flashes in the 

display and you can call it with the button "SELECT".
The currently set timer time (1 - 10 minutes) will now flash in 

the display. 
You can use the buttons "UP" or "DOWN" now to set the de-

sired timer time in one-minute steps.
Push this button "SELECT" to confirm the set time and save it.
Pushing the two buttons "UP" and "DOWN" at the same time 

then allows you to leave the programming menu.
To start the timer, keep the button "UP" pushed for approx. 

2 seconds. To indicated that the timer is running, the display 

"TIME:" will flash in the display.
To stop the timer early, keep the button "DOWN" pushed for 

approx. 2 seconds.

Figure 27

Содержание 1484607









































Отзывы:

Нет отзывов