manualshive.com logo in svg

Conrad 1484607, Руководство по эксплуатации, Страница: 33 / 40

Поделиться
Скачать
Conrad 1484607 Скачать руководство пользователя страница 33

33

c) 

Servo End Deflection Setting "EPA"

Using the servo end deflection setting "End Point Adjustment" you can precisely define the maximum size of servo 

travel that is permitted. The servo end deflection function is typically used to protect servos from mechanically hitting 

an obstacle when deflecting to the full extent. Foe each of the four control channels (CH1 - CH4), the EPA values can 

be set individually. 

  The EPA values of all control channels are set to 100% ex works and should not be changed.

Setting the servo end deflection

Call the programming menu. 
"REV" starts to flash in the display.
Push the buttons "UP" and "DOWN", until "EPA" flashes in the 

display and you can call it with the button "SELECT".
The display shows the indication for control channel 1, with digit 

"1" flashing. In addition to the control channel, the currently set 

"EPA" value is displayed. 
Use the buttons "UP" or "DOWN" to select the control chan-

nel 1 to 4 for which the "EPA" value is to be set or changed. 

When the desired control channel is displayed, push the button  

"SELECT". The percentage setting value now starts to flash. 
You can use the buttons "UP" or "DOWN" now to set the per-

centage. The larger the value set, the farther will the servo be 

deflected.
When the desired value is set, it must be confirmed and saved 

with the button "SELECT".
The buttons "UP" and "DOWN" can then be used to call another 

control channel for which you want to change the "EPA" value, 

or you can leave the programming menu again by pushing both 

buttons together.

Figure 26

Содержание 1484607









































Отзывы:

Нет отзывов