manualshive.com logo in svg

Conrad 1484607, Руководство по эксплуатации, Страница: 31 / 40

Поделиться
Скачать
Conrad 1484607 Скачать руководство пользователя страница 31

31

a) Servo Direction Setting "REV"

In this menu, you can individually set the running direction of each control channel. E.g. when a control movement 

to the left is made on the transmitter, but the model moves to the right, the movement direction or the servo running 

direction of this control channel must be changed. Since the movement directions of the respective control functions 

have already been set properly ex works, it is usually not required to make any changes in this menu. 

Adjusting the Servo Running Directions
Call the programming menu. 
The indication "REV" starts to flash in the display and can be 

called with the button "SELECT".
The display shows the indication for control channel 1, with digit 

"1" flashing. In addition to the control channel, the current set 

running direction is also displayed with a "0" for the standard 

running direction or a "1" for the reverse running direction.
Use the buttons "UP" or "DOWN" to select the control chan-

nel(1 - 4) for which the running direction is to be swapped. 

When the desired control channel is displayed, push the button 

"SELECT".
The running direction display "0" or "1" now starts to flash and 

can be switched with the buttons "UP" or "DOWN".
When the desired running direction is set, the value can be con-

firmed and saved with the button "SELECT".
The buttons "UP" and "DOWN" can now be used to call another 

control channel for which you want to change the running direc-

tion, or you can leave the programming menu again by pushing 

both buttons together.

Figure 24

Содержание 1484607









































Отзывы:

Нет отзывов