Conrad 1484607, Руководство по эксплуатации, Страница: 26 / 40

26
Pitch trimming:
Adjust the pitch trimming to the middle value (longer signal sound) with the trim button (see figure 1, item 12). The
helicopter should then hover at a consistent height if the control stick for the pitch function is in its middle position. If
required, you can correct the control stick position where the helicopter is in hover flight with the trim button.
Caution, important!
If you push the pitch trim button up repeatedly until the upper end position of the pitch trimming is reached,
the rotors of the helicopter may already start up if the flight battery is connected, even though the control
stick for the pitch function is in the bottom position.