Conrad 1484607, Руководство по эксплуатации, Страница: 18 / 40

18
e) Basic Information Relevant to the Control of Model Helicopters
Before you fly your model, you should first familiarize yourself with the control possibilities open to you and thereby
be able to fly safely. The model helicopter is controlled via the two control sticks at the remote control transmitter.
The following functions are available:
Pitch function
With the pitch function you can control the flying height of the helicopter (see figure 11). The left control stick (also see
figure 1, item 13) is used for control. To that effect, the control stick can be moved forward and backward. Unlike the
other control functions, the stick does not keep springing back to the centre position.
Because the angles of attack of the rotor blades cannot be changed, the flying height is adjusted by speed changes
of the main rotor. Pulling the control stick fully towards you switches off the engine and the rotor stops. If you push
the control stick forward, the main rotor runs and increases the speed according to the position of the stick. Once the
control stick is in the centre position, the main rotor speed should be high enough for the helicopter to hover. Parallel
to the main rotor, the tail rotor speed is automatically controlled by a percentage.
Figure 11