EPIQ 5 & 7 Training Manual
© 2016 Conquest Imaging
15
The monitor is powered by the VPPM; +24 Vdc (VDC_SYS signal) and
uses TFT/IPS display technology and has the following specifications:
Aspect ratio: 16:9
Contrast ratio: > 1000:1
Resolution: 1920 x 1080 pixels
Refresh rate: 60 Hz
Response time: < 14 ms
Extended viewing angle >178 degrees (horizontal and vertical)
The monitor has ambient lighting control for optimal image viewing
under variable lighting conditions.
It is mounted on fully articulating extension arm with four-way
articulation with 87.6 cm (34.5 in) lateral and 17.8 cm (7 in) vertical
adjustment ranges which allows positioning adjustments including
height, swivel, and tilt.
It also contains two speakers for audio output and a microphone for
user annotation of DVDs.
Video I/O Module
The Video Input/Output Module (VIO) handles video signal input and
out functions. The VIO is located in a PCI-E slot of the motherboard
and receives its 12Vdc and 3.3Vdc supply via the PCI slot.
Other functions of this board include:
Recieves DisplayPort 1920 X 1080 or 1024 X 768 input signal from
graphics card. The 1024 X 768 is a subset of the image refered to
as the region of interest (ROI).
Generates video signals for two S-Video outputs for DVD and a
DisplayPort output for additional Aux video.
Configures S-Video based on selected resolution. S-Video outputs
are disabled when the resolution is 1680 x 1050 and it triggers
the S-Video for 1280 x 768 resolution.
Following replacement of
either the VIO board or a
graphics card
Touch
Screen Calibration
should
be performed
All manuals and user guides at all-guides.com
