EPIQ 5 & 7 Training Manual
© 2016 Conquest Imaging
65
various disinfectants. If fluids are splattered on the screens they
should be wiped clean with a soft cloth as soon as possible to avoid
spots on the display.
To Clean Monitor and Touch Screen:
For routine cleaning use only LCD screen cleaning products.
Disinfectants may be used if necessary but should not be used
routinely!
Philips recommends using microfiber cloth for all cleaning.
Philips recommends using microfiber cloth for all cleaning.
Pre-moistened screen wipes may also be used.
To Clean External Surfaces:
A cloth with mild soap and water is recommended for external
surfaces.
Rubbing alcohol may be used for ink or other stains.
Acetone and other strong solvents will damage the exterior
plastic covers.
Touch Screen Calibration
Touch screen calibration should be performed during preventive
maintenance procedures or after touch screen replacement.
To calibrate the touch screen:
Press
Support
.
Click
Test/Utilities
Hardware Utilities
.
A dialog box will remind you to reboot the system when you exit
SupportConnect select
Yes
.
In the
Interactive Utilities
display, click
Touch Screen
Run
Test
. A message that the previous calibration data was
successfully removed will appear. Click
OK
.
Do not use glass cleaners,
Dispatch spray, or
products containing
bleach or alcohol on LED
displays. Repeated use of
such cleaners or products
may damage the monitor
and touch-screen
surfaces.
Note: Paper towels can
damage the LCD screen
surface.
You must reboot the
system after performing
the calibration procedure.
Warning: Do not change
screen orientation until
this procedure has been
completed.
All manuals and user guides at all-guides.com
