EPIQ 5 & 7 Training Manual
© 2016 Conquest Imaging
10
BCM Motherboard (customized BC77Q) for EPIQ 5 only.
This motherboard contains a single quad-core processor from the
Intel E3 Xeon product family and is used in version 1.3.1 and later
systems.
The processor supports 16 GB DIMM per system.
Supports a single standard 2.5-in (6.4-cm) hard drive for patient
data.
On systems with 1.4.1 software and later, an embedded graphics
chip supplies DisplayPort video for the main display and external
monitors. It also provides S-Video for systems with SVIO Slim
boards (for systems with a DVR, SVHS VCR, or other device
requiring an analog signal) and DVI video for the touch screen.
Supports up to three graphics heads on one graphics board,
including monitor (1920 x 1080), Aux Video (region of interest or
full-screen, user selectable), and control panel/touch screen.
Supported by no-battery, one-battery, and two-battery power
supply configuration.
User Interface Components
The control panel is the main user interface, receives user inputs,
communicates with the system PC Module via a USB port and displays
various outputs. It also provides user control of the five different
system power states with the On/Off and sleep mode switches.
It supports the following controls and indicators:
Touch Screen
USB QWERTY keyboard
USB trackball (optical laser)
Rotary knobs (can change function based on screen)
Push buttons (allow for mode selection)
Ambient light sensors
All manuals and user guides at all-guides.com
