EPIQ 5 & 7 Training Manual
© 2016 Conquest Imaging
76
Isolating the Control Panel
You may want to isolate the control panel if you need to determine if
it is backend problem such as the control panel or perhaps a cable
problem. To isolate the control panel:
Disconnect the DC power cable connecting the control panel to
the AIO to isolate the control panel.
Use the power switch (PWR SW) on the backplane to see if the
system starts.
Minimal Test Environment
The minimal Test Environment (MTE) allows a limited number of
service tools and utilities in PSC to function on non-booting systems.
Normally you use MTE when the operating system boots but the
system application does not boot. You may enter MTE by pressing
Ctrl+Alt+R during the bootup process. If an error message appears
during bootup you can enter the MTE by clicking Service. When
logging into MTE as a service user, you have access to the same tools
and utilities available in MTE that you do with your normal access
level. Some of the tools and utilities are:
System Information - Displays the hardware version, system
If you use Ctrl+Alt+R to
access the Minimal Test
Environment, you cannot
back up or restore system
settings. If you use Service
to access MTE, you may
be able to restore system
settings in certain
circumstances.
All manuals and user guides at all-guides.com
