EPIQ 5 & 7 Training Manual
© 2016 Conquest Imaging
53
To test Color and Color Power Angio operation:
1.
Press Color. Verify that the color box appears.
2.
Turn Color to change the gain. Verify that the color box is filled
with color noise.
3.
Turn Scale. Verify that the scale displayed on the color bar
changes.
4.
Turn Baseline. Verify the baseline changes on the color bar.
5.
Touch Steer and verify that the value switches between Steer
and Line Density.
6.
Turn Line Density and verify that the value changes
appropriately.
7.
Turn Dyn Range and verify that the value changes
appropriately.
8.
Touch or press CPA. Verify that the color bar changes to an
orange color.
9.
Turn CPA. Verify that the color in the color box changes to the
orange colors.
Testing PW Doppler, CW Doppler, and M-mode
Successful execution of this test indicates:
PW, CW, M-mode, and Volume are operational.
The trackball and trackball buttons are operational.
Doppler audio signal path and speakers are operational.
To Test PW Doppler, CW Doppler, and M-mode operation:
1.
While still in CPA imaging, press PW. Verify that the sample
volume marker appears.
2.
Do the following to test the trackball controls:
a.
If SV is amber-colored, rotate the trackball and press
the left trackball button to position the sample volume
Note:
In the lower center of the
display, a trackball
arbitration icon indicates
the function of the
trackball controls.
All manuals and user guides at all-guides.com
all-guides.com
