EPIQ 5 & 7 Training Manual
© 2016 Conquest Imaging
82
Pull the Rear I/O panel away from the opposite wall until the
panel prongs are clear.
Using a T20 TORX screwdriver, remove the three screws that
secure the Rear I/O PCB shield bracket to the Rear I/O panel
Motherboard Battery Replacement
The motherboard battery supplies power for the BIOS and system
clock when the system is powered down. If the system displays
warnings, shuts down unexpectly or does not retain time and date
settings you may want to check the motherboard battery. The battery
is a standard CR2032 CMOS lithium 3V coin cell. Expected battery life
is about 5 years. The BIOS may need to be reset after battery
replacement. This may be avoided by replacing the cell with the
power supply master switch on. For ATX
motherboards, this will
supply 5V power to the motherboard even if it is apparently
"switched off" and keep the CMOS memory energized.
Replacement Procedure
Power down the system.
Unplug power cable and hang from holder on the back of the
system.
Access the motherboard and locate the battery.
Battery location on
SuperMicro motherboard.
All manuals and user guides at all-guides.com
