Conexant H08-15350 Скачать руководство пользователя страница 77

Страница: 77 / 120

Command Reference Manual

1118

Conexant

3-59

Table 3-14. Result Code Definitions (Cont’d)

Code

Message

Meaning

FAX

A fax modem connection is established in a facsimile mode.

DATA

A data modem connection is established in a facsimile mode.

+MRR: 300

The modem has connected to the line at 300 bps and carrier reporting is enabled. (See S95 and Xn.)

+MRR: 1200/75

The V.23 backward channel carrier is detected and carrier reporting is enabled. (See S95 and Xn.)

+MRR: 75/1200

The V.23 forward channel carrier is detected and carrier reporting is enabled. (See S95 and Xn.)

+MRR: 1200

The modem has connected to the line at 1200 bps and carrier reporting is enabled. (See S95 and Xn.)

+MRR: 2400

The modem has connected to the line at 2400 bps and carrier reporting is enabled. (See S95 and Xn.)

+MRR: 4800

The modem has connected to the line at 4800 bps and carrier reporting is enabled. (See S95 and Xn.)

+MRR: 7200

The modem has connected to the line at 7200 bps and carrier reporting is enabled. (See S95 and Xn.)

+MRR: 9600

The modem has connected to the line at 9600 bps and carrier reporting is enabled. (See S95 and Xn.)

+MRR: 12000

The modem has connected to the line at 12000 bps and carrier reporting is enabled. (See S95 and Xn.)

+MRR: 14400

The modem has connected to the line at 14400 bps and carrier reporting is enabled. (See S95 and Xn.)

+MRR: 16800

The modem has connected to the line at 16800 bps and carrier reporting is enabled. (See S95 and Xn.)

+MRR: 19200

The modem has connected to the line at 19200 bps and carrier reporting is enabled. (See S95 and Xn.)

+MRR: 21600

The modem has connected to the line at 21600 bps and carrier reporting is enabled. (See S95 and Xn.)

+MRR: 24000

The modem has connected to the line at 24000 bps and carrier reporting is enabled. (See S95 and Xn.)

+MRR: 26400

The modem has connected to the line at 26400 bps and carrier reporting is enabled. (See S95 and Xn.)

+MRR: 28800

The modem has connected to the line at 28800 bps and carrier reporting is enabled. (See S95 and Xn.)

CONNECT 16800

The modem has connected to the line, the DTE speed is 16800 bps and DTE speed reporting is enabled.

CONNECT 21600

The modem has connected to the line, the DTE speed is 21600 bps and DTE speed reporting is enabled.

CONNECT 24000

The modem has connected to the line, the DTE speed is 24000 bps and DTE speed reporting is enabled.

CONNECT 26400

The modem has connected to the line, the DTE speed is 26400 bps and DTE speed reporting is enabled.

CONNECT 28800

The modem has connected to the line and either the line speed is 28800 bps and DCE speed reporting is
enabled, or the DTE speed is 28800 bps and DTE speed reporting is enabled.

+DR: ALT

The modem has connected to the line in MNP Class 5 and +DR: message reporting is enabled. (See S95,
Wn, and Xn.)

+DR: V.42B

The modem has connected to the line in V.42 bis and +DR: message reporting is enabled. (See S95, Wn,
and Xn.)

+DR: NONE

The modem has connected to the line without data compression and +DR: message reporting is enabled.
(See S95, Wn, and Xn.)

+ER: NONE

The modem has connected to the line without any form of error correction and the +ER: message
reporting has been enabled. (See S95, Wn, and Xn.)

+ER: LAPM

The modem has connected to the line in V.42 LAPM error correction mode and +ER: message reporting
has been enabled. (See S95, Wn, and Xn.)

+MRR: 31200

The modem has connected to the line at 31200 bps and carrier reporting is enabled. (See S95 and Xn.)

+MRR: 33600

The modem has connected to the line at 33600 bps and carrier reporting is enabled. (See S95 and Xn.)

+ER: ALT

Sent when the modem has connected in the MNP mode of error correction, and +ER: message reporting
has been enabled. (See S95, Wn, and Xn.)

LINE IN USE

The modem attempted to go off-hook when an extension was already occupying the line.

CONNECT 33600

The modem has connected to the line, the DTE speed is 33600 bps and the DTE speed reporting is
enabled.

CONNECT 31200

The modem has connected to the line DTE speed is 31200 bps and the modem is to report the DTE
speed upon connecting.

134

+MCR: B103

The modem has connected to the line with Bell 103 modulation and modulation reporting is enabled. (See
+MR, S95 and Xn.)

135

+MCR: B212

The modem has connected to the line with Bell 212 modulation and modulation reporting is enabled. (See
+MR, S95 and Xn.)

Содержание H08-15350

























































































































Результаты поиска

Содержание H08-15350

Отзывы:

Похожие инструкции для H08-15350

Бренды по названию

Популярные бренды

Conexant H08-15350, Справочное руководство

Результаты поиска

Содержание H08-15350

Отзывы:

Похожие инструкции для H08-15350

Бренды по названию

Популярные бренды