Condux Gulfstream 350e, Руководство пользователя и инструкция по безопасности

Страница: 40 / 52

40
PREPARE CABLE FOR TRADITIONAL DUCT
The Gulfstream™ 350e is designed so cable may be installed into the machine from the
side. Follow these steps so cable is properly positioned to begin operation.
1. Choose the correct Cable Grip and install on fiber optic cable (Figure 74).
2. Install 5/8" (16 mm) Swivel on Cable Grip. Grip must be firmly secured to cable
(Figure 75).
Note: The eye on the grip can be compressed to fit smaller diameter conduits. The eye
of a new grip can be taped with electrical tape in order to make it narrower and travel
more easily through the conduit.
3. Choose the correct Carrier and install on Swivel (Figure 76).
4. Prepare cable entry guides (Figure 77).
Figure 74. Install Cable Grip Figure 75. Install Swivel
Figure 76. Install Carrier Figure 77. Install Entry Guides
12.