Condux Gulfstream 350e, Руководство пользователя и инструкция по безопасности

Страница: 30 / 52

30
PRESSURE TEST CONDUIT
The conduit system must be able to withstand a maximum pressure of 215 psi (15 Bar),
and be free of leaks. Pressure test products are available to perform this test. These
tests are sold seperately. Conduit may also be tested using the Gulfstream™ 350e.
Follow the steps below:
1. Loosen the 6 nuts on the Air Block assembly (Figure 51).
Open the Conduit Clamp Cover and Air Block Cover (Figure 52).
2. Select the correct Conduit and Cable Components according to conduit and cable
size. Refer to the Conduit and Cable Pack selection on page 32 & 33.
3. Choose the correct Conduit Seal and install both halves securely (Figure 53).
4. Choose the correct Conduit Clamp and install both halves (Figure 54).
Figure 51. Loosen Nuts Figure 52. Open Clamp
Figure 53. Choose Seal Figure 54. Choose Clamp
10.