54 - System | Outbound Firewall | Src (Source) IP Filtering Page
RocketLinx WR7802-XT Series User Guide
: 2000638 Rev. A
Configuration Using the Web User Interface
System | Outbound Firewall | Src (Source) IP Filtering Page
Entries in this table are used to
restrict certain types of data packets
from your local network to the
Internet through the Gateway. Use of
such filters can be helpful in securing
or restricting your local network.
Select
Enable Source IP Filtering
, type
the local IP address and comment
(note for the entry) and then press
Apply
to activate the settings.
The table displays each local IP
address and the comment for each
entry. Use the table to edit or delete
any entry as needed.
After selecting
Apply
to activate the
settings you can then see the entries
you configured in the table below.
Note:
You must
Save
settings, if you want to
maintain these settings if the
WR7802-XT is rebooted.
System | Outbound Firewall | Dest (Destination) IP Filtering Page
Entries in this table are used to
restrict the computers in the LAN
from accessing certain websites in
the WAN according to IP address.
Select
Enable Destination IP Filtering
,
type the Destination IP address and
comment (note for the entry) and
then press
Apply
to activate the
settings.
The table displays each destination
IP address and the comment for
each entry. Use the table to edit or
delete any entry as needed.
After selecting
Apply
to activate the
settings you can then see the
entries you configured in the table
below.
Note:
You must
Save
settings, if you want to
maintain these settings if the
WR7802-XT is rebooted.
Beta
Version