100 - VPN | IPsec Settings Page
RocketLinx WR7802-XT Series User Guide
: 2000638 Rev. A
Configuration Using the Web User Interface
Click the
Apply
button to apply the configuration changes.
Note:
You must
Save
) settings, if you want to maintain these settings if the WR7802-XT is rebooted.
Interfaces for IPsec
to Use
Select the interface that you want to use communicate with the VPN peer.
Authentication
Method
Select the authentication method,
RSA key
or
Shared secret.
•
Shared secret
: Use a static shared secret key. The maximum length is 25.
•
RSA key
: Use an RSA digital signature authentication. The public key for
RSA authentication can be generated on the top-half of this page.
ESP Algorithm
Select the algorithm (
AES
,
DES
, or
3DES
) to encrypt an ESP (Encapsulating
Security Payload) payload.
Left - IP of network
interface
Left corresponds to the right in an IPsec point-to-point connection. The left and
right IP settings should be the same in both IPsec endpoints. Enter the interface
IP address of the left endpoint that can directly connect to the right endpoint. For
example, a WAN port IP address or Cellular IP address.
Left Source IP
Address
As Left - IP of network interface, enter the LAN port interface IP address of the
left endpoint.
Left Subnet
(network/netmask)
Enter the subnet mask of the left endpoint in CIDR notation, for example,
192.168.10.0/24.
Left RSA Key
The attribute is only required when using the RSA key authentication method
using the public key which was generated from the top-half of this page.
Right - IP of
network interface
Right corresponds to the left in an IPsec point-to-point connection. The right IP
settings should be the same in both IPsec endpoints. Enter the interface IP
address of the right endpoint that can directly connected to the left endpoint. For
example, a WAN port IP address or Cellular IP address.
Right Source IP
Address
As Right - IP of network interface, enter the LAN port interface IP address of the
right endpoint.
Right Subnet
(network/netmask)
Enter the subnet mask of the right endpoint in CIDR notation, for example,
192.168.20.0/24.
Right RSA Key
The attribute is only required when using the RSA key authentication method
using the public key which was generated from the top-half of this page.
IPsec Settings (Continued)
Beta
Version
