Comtech EF Data / Stampede
FX Series Administration Guide - Version 6.2.2
129
Chapter: FX Series Status
Section: FX Series Remote Status
MN-FXSERIESADM6 Rev 6
6.3
FX Series Remote Status
6.3.1
FX Series Remote WANOP Monitor
The WANOP Monitor provides a real time view of vital server statistics.
Figure 6-6 FX Series Remote Real-Time Monitor Screen
Real-Time Statistics
CPU (%):
This represents the CPU utilization of the FX for all system tasks.
Memory usage (%):
This shows the percent of RAM being consumed by the FX Series Remote including both the WAN
optimization service and the operating system. When this value approaches 90%, the appliance
will automatically reduce its memory resource consumption to prevent service disruption.
Active Flows:
The number of UDP and TCP connections currently flowing through the FX Remote and also the
maximum capacity is shown. If the current number of active flows reaches 99% of capacity, then
the FX will either go into “Fail-To-Wire” mode or not allow new connections to be established.
Throughput:
This is the throughput, in bits per second, since the last refresh interval.
WAN bytes processed:
Total number of bytes processed, both sent and received, by the acceleration server for traffic
between clients and the acceleration server.
WAN bytes saved:
This represents the reduction in traffic due between clients and the acceleration server due to
various acceleration techniques such as data compression, cache differencing, JPEG reduction,
Dynamic Data Suppression etc.
