Comtech EF Data / Stampede
FX Series Administration Guide - Version 6.2.2
125
Chapter: FX Series Status
Section: QOS Monitors
MN-FXSERIESADM6 Rev 6
When the Average Time Period is set to 24 hours, 72 hours or 30 days, the fields update every hour on the
hour as given by the “since Last Reset” timer. If the total time is less than the number of hours set by the
Average Time Period, then the fields represent the data since the last reset.
For example, if the Average Time Period is set to 72 hours, and it’s been 54 hours, 38 minutes and 18
seconds since the last reset, then the fields represent the first 54 hours of traffic. The rates are
updated every minute and represent the data over the respective interval terminating at that time.
If
the ‘Average Time Period’ is set to ‘Since Reset’, the fields are updated at each update interval.
WAN Rate:
Output data rate averaged rate over the interval.
Compression (%)
This value indicates the percentage bandwidth reduction due to header and payload compression
averaged over the interval.
Bytes Transferred:
Total bytes transferred during the interval.
Packets Transferred:
Total packets transferred during the interval.
Drop Rates:
This is the rate at which packets are dropped during the interval.
Aggregate Totals
This line gives the totals over all the links.
