4-17
Compaq Professional Workstation AP400 Maintenance and Service Guide
7.
Follow the instructions on the screen as the diagnostic tests are run on the devices. When
the testing is complete, the test option menu is displayed again.
8.
Exit to the Compaq Utilities menu.
View System Information (INSPECT)
The View System Information (INSPECT) utility provides information about the system once it
has been configured, including:
■
System
■
Contents of the operating system startup files
■
System ROM
■
System storage
■
System ports
■
Current memory configuration
■
ROM version
■
Type of processor and coprocessor
■
Diskette, CD-ROM, DVD-ROM, and hard drives
■
Active printer and communications interfaces
■
Modem
■
Keyboard
■
Graphics
■
Windows files
■
Network status
■
Miscellaneous
To run INSPECT, follow these steps:
1.
Access the Compaq Utilities menu by restarting your workstation and pressing F10 when
you see the words “F10=Setup” in the bottom-right corner of the screen. Select the
desired language when prompted. Then press Enter to bypass the title and welcome
screens.
2.
Select the View System Information (INSPECT) from Compaq Utilities menu, then press
Enter.
Create a Diagnostics Diskette
This option allows you to create both Setup or Diagnostics diskettes from the diagnostics
partition. To create the diskettes:
1.
Turn on or restart the workstation. If Windows NT Workstation is running, click Start,
Shut Down, Restart the computer.
