3-7
Compaq Professional Workstation AP400 Maintenance and Service Guide
Blank Bezel
To remove the blank bezel from the front bezel:
1.
Perform the service preparations described on page 3-2.
2.
Remove the following components:
❏
workstation cover
❏
front bezel
3.
With the inside of the front bezel facing you, push the tab on the blank bezel to the
right
➊
.
4.
Push the blank bezel out through the inside of the front bezel
➋
.
1
2
Figure 3-7. Removing the blank bezel
To replace the blank bezel and reassemble the workstation, reverse the above steps.
