manualshive.com logo in svg

Compaq 247320-003 - Deskpro 4000 - 5166 Model 2500/CDS, Справочное руководство

Поделиться
Скачать
Compaq 247320-003 - Deskpro 4000 - 5166 Model 2500/CDS Скачать руководство пользователя страница 6

xii

    Using This Guide

Writer: Your Name    Saved by: Troy Witte    Saved date: 07/16/97 3:19 PM

Pages: 2    Words: 293    Template: c:\msoffice\templates\commpref.dot

File Name: Preface.doc    Part Number: 270844-002

The following words and symbols mark special messages
throughout this guide:

!

WARNING:

   Text set off in this manner indicates tha t failure to

follow directions could result in bodily harm or loss of life.

CAUTION:

   Text set off in this manner indicates that failure to

follow directions could result in damage to equipment or loss of

information.

✎

Text set off in this manner presents clarifying information,
specific instructions, commentary, sidelights, or interesting
points of information.

Environmental

Commitment

Compaq is committed to making environmentally friendly
products. Your computer was produced in a
chlorofluorocarbons (CFC)-free factory. All plastics used in the
product are stamped with material composition to make
recycling more efficient. Reduce, reuse, and recycle are words
to live by at Compaq.

Содержание 247320-003 - Deskpro 4000 - 5166 Model 2500/CDS











































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды