manualshive.com logo in svg

Compaq 247320-003 - Deskpro 4000 - 5166 Model 2500/CDS, Справочное руководство

Поделиться
Скачать
Compaq 247320-003 - Deskpro 4000 - 5166 Model 2500/CDS Скачать руководство пользователя страница 125

Reference Guide     

7-5

Writer: Your Name    Saved By: Alyce Klingler-Castle    Saved Date: 06/13/97 5:49 PM

Pages: 36    Words: 4809    Template: c:\msoffice\templates\comm.dot

File Name Ch7.doc    Part Number 270844-001

Removing the Front Bezel

To install optional drives, you must remove the front bezel to
gain access to the drive cage.

CAUTION:

    Before removing the side panel and front bezel,

ensure that the computer is turned off and that the power cord is

disconnected from the electrical outlet.

To remove the front bezel, complete the following steps:

  1.  If you have locked the Smart Cover Lock, use Computer

Setup to unlock the lock.

  

For more information about Computer Setup, refer to
Chapter 8, “Using Compaq Utilities.”

  2.  Turn off the computer and any external devices.

  3.  Disconnect the power cord from the power outlet.

  4.  Remove the side panel.

Содержание 247320-003 - Deskpro 4000 - 5166 Model 2500/CDS











































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды