7-8
Upgrading the Minitower Computer
Writer: Your Name Saved by: Alyce Klingler-Castle Saved date: 06/13/97 5:49 PM
Pages: 36 Words: 4809 Template: c:\msoffice\templates\comm.dot
File Name Ch7.doc Part Number 270844-001
6. Grasp the expansion board cage by placing one hand on the
back lip of the cage and two fingers of the other hand in the
finger hole near the front of the cage
1
.
7. Pull up and out to remove the expansion board cage.
Removing the Expansion Board Cage
8. Rest the removed expansion board cage upside down on
the power supply and drive cage.
Sliding Out the System Board Tray
The slide-out system board tray allows you to quickly remove
the system board, without using tools.
CAUTION:
Before removing the side panel, ensure that the
computer is turned off and that the power cord is disconnected
from the electrical outlet.
To remove the system board tray, follow these steps:
1. If you have locked the Smart Cover Lock, use Computer
Setup to unlock the lock.
For more information about Computer Setup, refer to
Chapter 8, “Using Compaq Utilities.”
2. Turn off the computer and any external devices.
3. Disconnect the power cord from the power outlet.
