Page 15 of 29
© 2017 CommScope, Inc. All Rights Reserved
Or alternatively, cable straps can be used to mount the
UMB to a strand
9.6.
Installing the terminal in its UMB
After the UMB is mounted, install the indexing terminal in
the UMB as shown in Figure 11. Insert the cable end of
the terminal into the UMB first and then push the front of
the terminal into the UMB until the latch snaps closed.
1
2
2. PUSH ON FRONT OF MST
UNTIL LATCH SNAPS SHUT
1. INSERT CABLE END OF
MST INTO THE UMB
9.5.
Strand-mounting
Strand-mounting (aerial) – A strand-mount bracket kit is
available for aerial mounting the indexing terminal from
an overhead strand as shown. The brackets mount on the
UMB and are then clamped to the strand.
Refer to Universal Mounting bracket Strand-Mount
Installation Instruction ADCP-96-124 for the installation
procedure.
.
1/4-20
NYLON NUT
(2 PLACES)
10-24
NYLON NUT
(4 PLACES)
1/4-20 x 1-1/4 IN.
CARRIAGE BOLT
(2 PLACES)
10-24 x 1 IN.
CARRIAGE BOLT
(4 PLACES)
STRAND-MOUNTING THE UMB
USING Deltec® CABLE STRAPS
