CommScope FIBER INDEXING TERMINAL страница 9 Скачать руководство пользователя

Страница: 9 / 29

Page 9 of 29

5.5.5.

Cleaning kit HMFOC

To clean the HMFOC adapter and connector, a

Conec HMFOC connector cleaning tool (PN 15639)

can be ordered at US Conec.

Network design with the

indexing terminals

The different configurations of the indexing terminals

can be combined to provide all the necessary flexibility

and maximize the capacity of the distribution network.

First splitting level occurs typically in a Mini-FDH 3000

with 96 ports or an OSP closure (FOSC/FIST/TENIO)

with additional HMFOC connectors. The second splitting

level occurs within the indexing terminals, the different

configurations are explained in section 5.2.

Indexing chains always start with terminal one and build

outward in procession to a value no greater than twelve.

Indexing chains always provide the next fiber to the

next terminal (i.e. Terminal 1 will use fiber 1 within the

“chained” assembly).

In order to build an optimized network utilizing indexing

terminals, the following items should be considered prior

to beginning the network design:

• Locate and identify all Customers to have an

overview of all area to be covered/deployed.

• Clear up all drawing nomenclature: hand holes,

poles, ducts, terminals, etc.

• Identify feeder fiber cables availability. If available,

define the fiber count & type of cables.

• Locate nearest CO, Node or HUB to determine the

maximum distance allowed within the optical budget

• Take into consideration, drop cable distances/routes

• Identify any network deployment restriction: Poles,

aerial capacity, underground ducts

• Discuss the best location for Indexing Terminals

(aerial, pole, wall, manhole)

• Consider the maximum number of services per

indexing terminal

• Split ratio: Specified by project

Installation

7.1.

Tools and materials required

The following basic tools, auxiliary equipment, and

materials are required for the installation of the indexing

terminals:

• Vertical roller reel (if the terminal is mounted on a

cable spool)

• 216B key tool

(used to open optical port dust cap)

• Hardened connector/adapter cleaning kit

(FHD-ACC-CLNKIT1)

• US Conec HMFOC connector cleaning tool (PN

15639)

• Utility knife

• Cable pulling equipment

• Appropriate fasteners to mount the UMB and tools to

install the fasteners

• “P” clamps for self supporting aerial installations.

Cable routing rings or fasteners (see local practices).

Cable can be lashed for messenger applications.

5.4.

Universal Mounting bracket

Each terminal is supplied with the Universal Mounting

Bracket (UMB) which is used for mounting the fiber

indexing terminal. The UMB may be attached to various

mounting surfaces using a variety of fasteners as will be

explained in section 9.

The UMB is housing specific and exist for the full size

hardened housing as well as for the DLX housing.

5.5.

Accessories

5.5.1.

Strand mounting kit

To secure the terminal to a strand, a strand-mount

bracket kit is available and must be ordered separately.

Refer to Universal Mounting bracket Strand-Mount

Installation InstructionADCP-96-124 for the installation

procedure. Section 9.5 provides some info about how to

use this strand mounting kit.

5.5.2.

NDX-POLE-BRKT

To store excess cable in aerial applications, an NDX-

POLE-BRKT kit is available and must be ordered

separately. If using the full size hardened connector

housing, an adapter bracket must also be ordered when

using the excess cable storage bracket (part number

NDX-4X3-ADPT-BRKT).

The bracket is secured with 1/4 inch thread size hardware

to a pole. Excess cable can be looped around the

bracket. When all excess cable is stored, the terminal

with its UMB can be slided in an upward direction into the

NDX-pole bracket.

5.5.3.

216B key tool

The opening to each optical port is sealed with a

threaded dust cap that prevents the entry of dirt and

moisture. A standard 216B security tool can be ordered to

remove the dust cap.

5.5.4.

Cleaning kit FHD-ACC-CLNKIT1

To clean the drop ports adapters and connectors (both full

size hardened and DLX), a cleaning kit can be ordered.

How to use this is explained in chapter 14 maintenance.

Содержание FIBER INDEXING TERMINAL






























Результаты поиска

Содержание FIBER INDEXING TERMINAL

Отзывы:

Похожие инструкции для FIBER INDEXING TERMINAL

Бренды по названию

Популярные бренды

CommScope FIBER INDEXING TERMINAL, Руководство по установке

Результаты поиска

Содержание FIBER INDEXING TERMINAL

Отзывы:

Похожие инструкции для FIBER INDEXING TERMINAL

Бренды по названию

Популярные бренды