CommScope Era, Руководство по установке

Страница: 41 / 71

M0201ANC_uc CommScope Era
™
Fiber Low Power Carrier Access Point Installation Guide
© June 2019 CommScope, Inc. Page 37
Mount the Fiber CAP L
d
Confirm that the CAP L-1 is securely attached to the Dual Wall Mount Bracket, as shown in the
following graphic.
10
Repeat Step 6 on page 34 through Step 9 on page 36 to mount the CAP L-2 chassis in the Dual Wall
Mounting Bracket; install the CAP L-2 chassis back-to-back with the CAP L-1 chassis, as shown Figure 12
on page 32 .
11
After you mount the two CAP Ls in a Dual Mounting bracket, follow the steps in
•
"Ground the Fiber CAP L (Optional)” on page 55 (if grounding is required or preferred)
•
"Connect the Passive RF Antenna” on page 59 .